Info: 'To insure that your restored drive will start up properly you should drag the System and Finder files onto the desktop as shown. After restarting the Macintosh these files can be put back in a folder.'
2:
Bounds: x1=10, y1=4, x2=364, y2=220
Type: 64
Info: ''
DITL_142.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=16, x2=329, y2=34
Type: 4
Info: 'OK'
1:
Bounds: x1=264, y1=64, x2=329, y2=82
Type: 4
Info: 'Cancel'
2:
Bounds: x1=16, y1=8, x2=248, y2=88
Type: -120
Info: 'Since it may take several minutes to find the next tape volume, you are given this opportunity to cancel the operation if you meant to select the Drive button.'
DITL_141.txt
Items: (4 entries)
0:
Bounds: x1=264, y1=184, x2=328, y2=208
Type: 4
Info: 'Cancel'
1:
Bounds: x1=16, y1=184, x2=224, y2=208
Type: 4
Info: 'Restore startup information'
2:
Bounds: x1=8, y1=8, x2=344, y2=88
Type: -120
Info: 'If this hard disk drive is used to startup your Macintosh, then it must have startup information on it. If it has been initialized before being restored then that startup information will be absent.'
3:
Bounds: x1=8, y1=96, x2=344, y2=176
Type: -120
Info: 'This startup information can be restored from tape if it was present when the disk was backed up. (You can always transfer a System and Finder to the disk using Finder which automatically makes it a startup device).'
DITL_140.txt
Items: (2 entries)
0:
Bounds: x1=158, y1=69, x2=218, y2=89
Type: 4
Info: 'OK'
1:
Bounds: x1=88, y1=8, x2=232, y2=56
Type: -120
Info: 'Sorry, the erase operation was not successful.'
DITL_139.txt
Items: (3 entries)
0:
Bounds: x1=160, y1=72, x2=225, y2=92
Type: 4
Info: 'Cancel'
1:
Bounds: x1=72, y1=72, x2=139, y2=92
Type: 4
Info: 'Go Ahead'
2:
Bounds: x1=72, y1=16, x2=224, y2=48
Type: -120
Info: 'Are you sure you want to erase the tape?'
DITL_138.txt
Items: (3 entries)
0:
Bounds: x1=16, y1=64, x2=81, y2=82
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=96, x2=81, y2=114
Type: 4
Info: 'Cancel'
2:
Bounds: x1=104, y1=16, x2=328, y2=112
Type: -120
Info: 'The cassette in the drive is write-protected.Please insert a write-enabled cassette, wait a moment, and after the tape has stopped moving click OK.'
DITL_137.txt
Items: (3 entries)
0:
Bounds: x1=16, y1=64, x2=81, y2=82
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=96, x2=81, y2=114
Type: 4
Info: 'Cancel'
2:
Bounds: x1=104, y1=16, x2=328, y2=112
Type: -120
Info: 'The tape drive indicates there is no cassette in the drive (possibly inserted upside down).Please insert a cassette, wait a moment, and after the tape has stopped moving click OK.'
DITL_136.txt
Items: (3 entries)
0:
Bounds: x1=191, y1=8, x2=256, y2=26
Type: 4
Info: 'Continue'
1:
Bounds: x1=191, y1=33, x2=256, y2=51
Type: 4
Info: 'Abort'
2:
Bounds: x1=8, y1=58, x2=272, y2=126
Type: -120
Info: 'End of tape was encountered.You can abort this volume backup and start at the beginning of a new tape or insert a new tape and click continue.'
DITL_135.txt
Items: (2 entries)
0:
Bounds: x1=158, y1=69, x2=218, y2=89
Type: 4
Info: 'OK'
1:
Bounds: x1=95, y1=13, x2=227, y2=62
Type: -120
Info: 'End of tape error. Not all files were written.'
DITL_134.txt
Items: (2 entries)
0:
Bounds: x1=168, y1=88, x2=228, y2=108
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=8, x2=240, y2=72
Type: -120
Info: 'Not enough memory for the buffers. If you are running under switcher, don't.'
DITL_133.txt
Items: (2 entries)
0:
Bounds: x1=225, y1=95, x2=285, y2=115
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=8, x2=288, y2=88
Type: -120
Info: 'The tape drive does not respond.If the tape is rewinding wait for it to stop before trying to read or write. You may also need to check the cable.'
DITL_132.txt
Items: (5 entries)
0:
Bounds: x1=15, y1=167, x2=75, y2=187
Type: 4
Info: 'OK'
1:
Bounds: x1=230, y1=167, x2=290, y2=187
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=15, x2=292, y2=80
Type: 8
Info: 'Do you want to have the files marked on the tape volume: '^0' written to the disk volume: '^1'?'
3:
Bounds: x1=15, y1=82, x2=292, y2=119
Type: -120
Info: 'This WILL cause files on the disk that have the same name to be replaced.'
4:
Bounds: x1=16, y1=136, x2=288, y2=152
Type: -120
Info: 'This operation may take some time.'
DITL_131.txt
Items: (5 entries)
0:
Bounds: x1=15, y1=167, x2=75, y2=187
Type: 4
Info: 'OK'
1:
Bounds: x1=230, y1=167, x2=290, y2=187
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=15, x2=287, y2=63
Type: 8
Info: 'Do you want to have the files marked on the disk volume: '^0' written to the tape drive?'
3:
Bounds: x1=15, y1=69, x2=287, y2=117
Type: -120
Info: 'The tape drive is currently set so that it WILL ^1erase the current contents of the tape.'